|
|
|
|
Catalogue>> |
Chemical & Rubber & Plastics
|
|
|
expancel microspheres
|
| E40CA |
| EXW USD$10.61 |
| MOQ:1000 PCS |
| expancel microsphere high refractory bubble brick alumina |
| expancel microspheres E40CA Profession Design expancel microsphere high refractory bubble brick alumina based |
|
 |
|
|
|
Azodicarbonamide AC 2000
|
| AC2000 |
| EXW USD$2.07 |
| MOQ:1000 PCS |
| Azodicarbonamide AC Blowing Agent Foaming Agent EVA Sheet PVC |
| Azodicarbonamide AC Blowing Agent Foaming Agent EVA Sheet PVC |
|
|
|
|
|
Polymer Polyol LHS-50
|
| LHS-50 |
| EXW USD$ |
| MOQ: PCS |
| High Quality Wanhua Polyol - Polymer Polyol LHS-50 |
| High Quality Wanhua Polyol - Polymer Polyol LHS-50 |
|
|
|
|
|
Polymer Polyol for hard sponge
|
| POP-2015 |
| EXW USD$2,336.36 |
| MOQ:16800 PCS |
| Solid content 15% Polymer Polyol for Flexible Foam |
❤ POP-2015 is an inactive polyether polyol modified with a styrene-acrylonitrile (SAN) polymer with a solidcontent of approx 15% by weight. It can be used for the production of slabstock foams.
❤ Handling PrecautionsFlash point is above 200℃ (open cup method), flammable but non-explosive. In case of fire, put out withfoams, dry powder, steam or water.When handling polyols, avoid exposure to eyes or prolong contact with the skin. If eye contact occurs,flush with plenty of water. If skin contact occurs, wash exposed areas thoroughly with soap and water.
❤ StorageRecommended storage temperature (℃):10-35Shelf life (ex-works) 12 months if stored in sealed, moisture-tight containers.Partially used containers should be tightly resealed due to the hygroscopic nature of the product.Recommended temperature for processing (℃):20-25. |
|
|
|
|
|
Polyol LPOP-2025 for slabstock foam polirutano
|
| LPOP-2025 |
| EXW USD$1,409.09 |
| MOQ:1000 PCS |
| Polyol LPOP-2025 for slabstock foam polirutano |
| LPOP-2025 Suitable for the preparation of flexible polyurethane foam, which can increase the compressive strength of the product. Used in furniture cushions, mattresses, sound-absorbing panels, carpet lower layer, filters, packaging materials, etc. |
|
|
|
|
|
TDI 65 35 Polyol Toluene Diisocyanate
|
| TDI-65/35 |
| EXW USD$1.99 |
| MOQ:20 PCS |
| TDI/MDI Polyol Toluene Diisocyanate Polyurethane Foam |
| This product is isocyanate ester product, can replaced all or part of the T80 , can improved the compression load of the product ,it is widely used in the production of polyester-based soft foam, high-bearing sponges, semi-rigid ester foam, high resilience, slow rebound , paint and other industries. |
|
|
|
|
|
|
|
|
Inactive polyether polyol
|
| POP-2010 |
| EXW USD$2,121.21 |
| MOQ:16800 PCS |
| POP-2010, supplier an inactive polyether polyol modified with polymer 10% |
❤LPOP-2010 is an inactive polyether polyol modified with a styrene-acrylonitrile (SAN) polymer with a solid content of approx 10% by weight. It can be used for the production of slabstock foams.Sampling Moisture access must be prevented when taking product samples.
❤ POP-2010 polyol is a unique grafted polyether polyol containing styrene and acrylonitrile with a solids content of 10%. POP-2010 polyol is designed to increase foam stiffness in the manufacture of slab foam and VE memory foam. It can be used to produce high load-bearing foams in a wide density range. POP-2010 can be used in formulations using all TDI, TDI/polymer MDI blends, or all-polymer MDI components. |
|
|
|
|
|
O-isopropyl Ethylthiocarbamate
|
| 141-98-0 |
| EXW USD$3.14 |
| MOQ:20000 PCS |
| O-isopropyl Ethylthiocarbamate IPETC CAS 141-98-0 |
| O-isopropyl Ethylthiocarbamate IPETC CAS 141-98-0 |
|
|
|
|
|
Expancel Microspheres
|
| 301C |
| EXW USD$11.36 |
| MOQ:1000 PCS |
| Expancel Microspheres With High Quality |
| Expancel Microspheres is a thermally expandable microcapsule,it consist of a polymer shell encapsulating hydrocarbon.When heated,the gas in the shell expands increasing pressure while the thermoplastic shell softens,resulting in a dramatic increase in volume.Upon cooling a hollow and extremely light plastic sphere remains.Cell size increase by 3-5 times and the volume of the microcapsule increases by 50-100 times. |
|
|
|
|
|
|
|
|
|
75-09-2
