|
|
|
|
Catalogue>> |
Polyether Polyol
|
|
|
Polyether Polyol for Sponge
|
| DEP 5631 |
| EXW USD$1,942.50 |
| MOQ:1000 PCS |
| Elastomer flexible foam polyether Polyol |
| Elastomer flexible foam polyether Polyol |
| SOLD:144600 PCS |
 |
|
|
|
Inactive polyether polyol
|
| POP-2010 |
| EXW USD$2,121.21 |
| MOQ:16800 PCS |
| POP-2010, supplier an inactive polyether polyol modified with polymer 10% |
❤LPOP-2010 is an inactive polyether polyol modified with a styrene-acrylonitrile (SAN) polymer with a solid content of approx 10% by weight. It can be used for the production of slabstock foams.Sampling Moisture access must be prevented when taking product samples.
❤ POP-2010 polyol is a unique grafted polyether polyol containing styrene and acrylonitrile with a solids content of 10%. POP-2010 polyol is designed to increase foam stiffness in the manufacture of slab foam and VE memory foam. It can be used to produce high load-bearing foams in a wide density range. POP-2010 can be used in formulations using all TDI, TDI/polymer MDI blends, or all-polymer MDI components. |
|
|
|
|
|
Polymer Polyol for hard sponge
|
| POP-2015 |
| EXW USD$2,336.36 |
| MOQ:16800 PCS |
| Solid content 15% Polymer Polyol for Flexible Foam |
❤ POP-2015 is an inactive polyether polyol modified with a styrene-acrylonitrile (SAN) polymer with a solidcontent of approx 15% by weight. It can be used for the production of slabstock foams.
❤ Handling PrecautionsFlash point is above 200℃ (open cup method), flammable but non-explosive. In case of fire, put out withfoams, dry powder, steam or water.When handling polyols, avoid exposure to eyes or prolong contact with the skin. If eye contact occurs,flush with plenty of water. If skin contact occurs, wash exposed areas thoroughly with soap and water.
❤ StorageRecommended storage temperature (℃):10-35Shelf life (ex-works) 12 months if stored in sealed, moisture-tight containers.Partially used containers should be tightly resealed due to the hygroscopic nature of the product.Recommended temperature for processing (℃):20-25. |
|
|
|
|
|
Polymer Polyol LHS-50
|
| LHS-50 |
| EXW USD$ |
| MOQ: PCS |
| High Quality Wanhua Polyol - Polymer Polyol LHS-50 |
| High Quality Wanhua Polyol - Polymer Polyol LHS-50 |
|
|
|
|
|
high-quality polyurethane raw material polymer polyol liquid LHS-200
|
| LHS-200 |
| EXW USD$1,404.70 |
| MOQ:1000 PCS |
| Polyurethane raw material polymer polyol liquid LHS-200 |
| LHS-200 is an inactive polymer polyol modified with a styrene-acrylonitrile (SAN) polymer with a solid content of approx 50% by weight. It effectively combines a high solid content with low viscosity. LHS-200 can also be used for the production of conventional slabstock foams with very high load bearing properties. |
|
|
|
|
|
Polyol LPOP-2025 for slabstock foam polirutano
|
| LPOP-2025 |
| EXW USD$1,409.09 |
| MOQ:1000 PCS |
| Polyol LPOP-2025 for slabstock foam polirutano |
| LPOP-2025 Suitable for the preparation of flexible polyurethane foam, which can increase the compressive strength of the product. Used in furniture cushions, mattresses, sound-absorbing panels, carpet lower layer, filters, packaging materials, etc. |
|
|
|
|
|
|
|
|
|
75-09-2
